BIBLIOGRAPHIQUES
[MURA 06] Murali M., Ratna D., Samui A.B., Chakraborty
B.C., « Synthesis, Characterization, and Evaluation of
Carboxyl-Terminated Poly(ethylene glycol) Adipate-Modified Epoxy networks :
Effect of Molecular Weight », Journal of Applied Polymer
Science, vol. 103, (2007), pp. 1723-1730.
[RATN 03] Ratna D., Manoj N.R., Varley R., Singh Raman
R.K., Simon G.P., « Clay-reinforced Epoxy Nanocomposites
», Polymer International, vol.52, (2003), pp. 1403-1407.
[PENN 98] Penn L.S., Wang H., «
Epoxy Resin », Handbook of Composite, Edited by S.T.
Peters, Published in 1998 by Chapman & Hall, London, ISBN 0412 540207.
[CHER 97] Cherdoud-Chihani A., Mouzali M., Abadie
M.J.M., « Etude par DSC de la Réticulation de
Systèmes DGEBA/Polyacides », European Polymer Journal,
vol. 33, N°6, (1997), pp. 969-975.
[BARR 95] Barral L., Cano J., López A.J., Lopez
J., Nógueira P., Ramirez C., « Thermal Degradation of
a Diglycidyl Ether of Bisphenol A/1,3-Bisaminomethylecyclohexane
(DGEBA/1,3-BAC) Epoxy Resin System », Thermochimica acta, vol.
269/270, (1995), pp. 253-259.
[KAZI 04] Kazilas M.C., Partridge I.K.,
« Temperature Modulated Dielectric Analysis (TMDA) :
A New Experimental Technique for the Separation of
Temperature and Reaction Effects in Dielectric Cure Monitoring Signals »,
Measurement Science and Technology, vol.15, (2004), pp. L1-L4.
[STEV 04] Steven S., Guy V.A, Bruno V.M., «
Reaction Kinetics Modeling and Thermal Properties of Epoxy-Amines as
Measured by Modulated-Temperature DSC. I. Linear Step-Growth Polymerization of
DGEBA + Aniline », Journal of Applied Polymer Science, vol.
91, (2004), pp. 2798-2813.
[ESCO 05] Escola M.A., Moina C.A., Nino Gomez A.C.,
Ybarra G.O., « The Determination of the Degree of Cure in
Epoxy Paints by Infrared Spectroscopy », Polymer Testing, vol.
24, (2005), pp. 572-575.
[TRIP 07] Tripathi G., Srivastava D., «
Effect of Carboxyl-Terminated Poly (Butadiene-co-Acrylonitrile) (CTBN)
Concentration on Thermal and Mechanical Properties of Binary Blends of
Diglycidyl Ether of Bisphenol-A (DGEBA) Epoxy Resin », Materials
Science & Engineering A, vol. 443, (2007), pp. 262-269.
[VIJA 05] Vijay I.R., Palmese G.R., «
Influence of TetraHydrofuran on Epoxy-Amine Polymerization »,
Macromolecules, vol. 38, (2005), pp. 6923-6930.
[PENN 98] Penn L.S., Wang H., «
Epoxy Resin », Handbook of Composite, Edited by S.T.
Peters, Published in 1998 by Chapman & Hall, London, ISBN 0412 540207.
[NARA 99] Narayanan S., Schadler L.S.,
« Mechanisms of Kink-band Formation in Graphite/Epoxy
Composites : a Micromechanical Experimental Study », Composite
Materials and Technology, vol. 59, (1999), pp. 2201-2213.
[KARK 96] Karkanas P.I., Partridge I.K., Attwood D.,
« Modeling the Cure of a Commercial Epoxy Resin for
Applications in Resin Transfer Moulding », Polymer
International, vol. 41, (1996), pp. 183-191.
[WALL 06] Wallace M., Attwood D., Day R.J., Heatley
F., « Investigation of the Microwave Curing of the PR500
Epoxy resin System », Journal Mater Sciences, vol. 41, (2006),
pp. 5862-5869.
[POTT 02] Potter K., « Beyond the Pin Jointed Net :
Maximising the Deformability of Aligned Continuous Fibre Reinforcements »,
Composites Part A Applied Science and Manufacturing, vol. 33,
(2002), pp. 677-683.
[WANG 98] Wang J., Page J.R., Patod R.,
« Experimental Investigation of the Draping Properties of
Reinforcement Fabrics », Composites Science and Technology,
vol. 58, (1998), pp. 229-231.
[PROU 94] Proulx P.P., Cormier G., Capohianco J.A.,
Champagnon B., Bettinellis M., « Spectroscopie Raman et Raman
à Basses Fréquences dans des Verres de Métaphosphate de
Plomb, de Zinc et de Baryum Dopés avec l'Ion Eu3+
», Journal of Physics Condens. Matter 6, (1994), pp.
215-283.
[MIJO 95] Mijoviæ J., Andieliæ S., Kenny
J. M., « In situ Real-time Monitoring of Epoxy/Amine Kinetics
by Remote Near Infrared Spectroscopy », Polymers for Advanced
Technologies, vol. 7, (1995), pp. 1-16.
[DEGA 06] Degamber B., Fernando G.F., «
Fibre Optic Dilato-spectroscopic Sensor : Simultaneous Thermal, and
Physical Analysis of Materials », Smart Materials Structures,
vol. 15, (2006), pp. 1054-1062.
[ZINC 01] Zinck P., Salmon L., Gérard J.F.,
« Durabilité d'Interfaces Polyépoxyde / Fibre
de Verre E au Sein de Microcomposites et de Matériaux Composites
Unidirectionnels en Milieu humide », Micromechanical Modeling
Polymer, vol 42, (2001), pp. 5401-5413.
[NELS 98] Nelson M.P., Aust J.F., Dobrowolski J.A.,
Verly P.G. Mysrick M.L., « Multivariate Optical Computation
for Predictive Spectroscopy », Analytical Chemistry, vol. 70,
N°1, (1998), pp. 73-82.
[CHER 98] Cherdoud-Chihani A., Mouzali M., Abadie
M.J.M., « Study of Crosslinking AMS/DGEBA System by FTIR
», Journal of Applied Polymer Science, vol. 69, (1998), pp.
1167-1178.
[PUGL 03] Puglia D., Valentini L., Kenny J.M.,
« Analysis of the Cure Reaction of Carbon Nanotubes/Epoxy
Resin Composites Through Thermal Analysis and Raman Spectroscopy »,
Journal of Applied Polymer Science, vol. 88, (2003), pp.
452-458.
[LIAN 05] Liang G., Zuo R., Lu T., Wang J.,
« Modification of Venyl Ester Resin by a New Thermoset Liquid
crystalline Diacrylate », Journal of Materials Science, vol.
40, (2005), pp. 2089-2091.
[LAIN 07] Laine M.R., Kim S.G., Rush J., Mollan M.,
Sun H.J., Lodaya M., « Ring-opening Polymerization of Epoxy
end-terminated Poly (Ethylene Oxide) as a Route to Highly Crosslinked Materials
with Exceptional Swelling Behavior (II) », Polymer
International, vol. 56, (2007), pp.1006-1015.
[HUAN 02] Yang H., James Lee L., «
Effect of Resin Chemistry on Redox Polymerization of Unsaturated Polyester
Resins », Journal of Applied Polymer Science, vol. 84, (2002),
pp. 211-227.
[CHEN 06] Cheng G., Chang-Li L., Yi-Fei L., Bai Y.,
« Preparation and Characterization of High Refractive Index
Thin Film of TiO2/Epoxy Resin Nanocomposites », Journal
of Applied Polymer Science, vol. 102, 2006, pp.1631-1636.
[MONN 98] Monney L., Belali R., Vebrel J., Dubois C.,
Chambaudet A., « Photochemical Degradation Study of an Epoxy
Material by IR-ATR Spectroscopy », Polymer Degradation and
Stability, Vol. 62, 1998, pp. 353-359.
[DENQ 99] Denq B.L., Hu Y.S., Chen L.W., Chiu W.Y., Wu
T.R., « The Curing Reaction and Physical Properties of
DGEBA/DETA Epoxy Resin Blended with Propyl Ester Phosphazene »,
Journal of Applied Polymer Science, Vol. 74, (1999), pp.
229-237.
[MONN 99] Monneya L., Duboisa C., Perreux D.,
Burtheret A., Chambaudet A., « Mechanical Behaviour of an
Epoxy-glass Composite Under Photo-oxidation », Polymer Degradation
and Stability, vol. 63, (1999), pp. 219-224.
[WRIG 89] Wright W.W., « TGDDM Based
Epoxy Resin Systems for Aerospace Applications ». A review part I,
Comp. Polym, (1989), Vol. 2, pp.275-324.
[GAN 89] Gan S., Gillham J.K. Prime R.B.,
«A Methodology for Characterizing Reactive Coatings:
Time-Temperaturetrans Formation (TTT). Analysis of the Competition Between
Cure, Evaporation and Thermal Degradation for an Epoxy-phenolic System»,
J. Appl. Polym. Sci., (1989), Vol. 37, pp. 803-816.
[PANG 90] Pang K.P., Gillham J.K.,
«Competition Between Cure and Thermal Degradation in a High
Tg epoxy System : Effect of Time and Temperature of Isothermal Cure on the
Glass Transition Temperature», J. Appl. Polym. Sci., (1990),
Vol. 39, pp.909-933.
[MORG 79] Morgan R.J., O'Neal J.E., Miller D.B.,
«The Structure, Modes of Deformation and Failure, and
Mechanical Properties of DDS cured TGDDM Epoxy», J. Mat. Sci.,
(1979), Vol. 14, pp. 109-124.
[MORG 87] Morgan R.J., Mones E.T.,
«The Cure Reactions, Network Structure, and Mechanical
Response of DDS cured TGDDM Epoxies», J. Appl. Polym. Sci.,
(1987), Vol. 33, pp. 999-1020.
[GALY 85] Galy J.,«Mécanisme
de Réaction entre un Prépolymère Epoxyde et un Durcisseur
Cyanoguanidine : Caractérisation des Réseaux Obtenus»,
Thèse de Doctorat de l'Inst. Nat. des Sci. Appl. de Lyon.,
Lyon, (1985).
[KAEL 73] Kaelble D.H., «Physical
and Chemical properties of Cured Resins», EpoxyResins Chemistry and
Technology, Ed C.A. May et Y. Tanaka, (1973), pp.327-371.
[BERS 99] Bershtein V.A.,
Peschanskaya N.N., Halary J.L., Monnerie L.,
«The sub-Tg relaxations in pure and antiplasticized model
epoxy networks as studied by high resolution creep rate spectroscopy»,
Polymer, (1999), Vol. 40, pp.6687-6698.
[HALA 89] Halary J.L., Cukierman S., Monnerie L.,
«Relations entre structure chimique et
propriétés mécaniques dans lesréseaux
époxydes», Bull. Soc. Chem. Belg.,(1989), Vol
98 (9-10), pp. 623-634.
[URBA 91] Urbaczewski-Espuche E., Galy J., Gerard
J.F., Pascault J.P., Sautereau H., « Influence of chains
flexibility and crosslink density on mechanical properties of epoxy/amine
networks, Polym. Eng. and Sci., (1991), Vol. 31 (22),
pp.1572-1580.
[GERA 92] Gerard J.F., J.Andrews S., Macosko C.
W., «Dynamic Mechanical Measurement : Comparison Between
Bending and Torsion Methods on a Graphite Reinforced and a Rubber-modified
Epoxy», Polym. Comp., (1992), Vol. 11 (2), pp.90-97.
[MIJO 81] Mijovic J., Tsay L.,
«Correlation Between Dynamic Mechanical Properties and
Nodular Morphology of Cured Epoxy Resins», Polymer, (1981),
Vol. 22, pp.902-906.
[OCHI 88] Ochi M., Kageyama H., Shimbo M.,
«Mechanical and Dielectric Relaxations of Poly (hydroxy ethers) : 1.
Lowtemperature Relaxations», Polymer, (1988), Vol. 29,
pp.320-324.
[HARI 97] Harismendy I., Miner R., Valea A.,
Llano-Ponte R., Mujika F., Mondragon I., «Strain Rate and
Temperature Effects on the Mechanical Behaviour of Epoxy Mixtures With
Different Crosslink Densities», Polymer, (1997), Vol.
38 (22), pp.5573-5577.
[WOLF 99] Wolfrum J., Ehrenstein G.W.,
«Interdependence Between the Curing, Structure and the Mechanical
Properties of Phenolic Resins, J. Appl. Polym. Sci., (1999), Vol.
74, pp. 3173-3185.
[LEVC 95] Levchik S.V., Camino G., Luda M.P., Costa
L., « Thermal Decomposition of 4, 4'-diaminodiphenylsulphone
», Thermochimica Acta, vol 260, (1995), pp. 217-228.
[COLO 00] Colomban Ph., Mathez J., Tschiember J.,
Pérès P., « Raman Measurement of the Carbon
Fibres Stress Within Industrial Epoxy Matrices Under Controlled Tensile Strain
», JNC Epoxy.
[RATN 03] Ratna D., Manoj N.R., Varley R., Singh Raman
R.K., Simon G.P., « Clay-reinforced Epoxy Nanocomposites
», Polymer International, vol.52, (2003), pp. 1403-1407.
[MONT 07] Montanini R., D'Acquisto L., «
Simultaneous Measurement of Temperature and Strain in Glass Fiber/Epoxy
Composites by Embedded Fiber Optic Sensors : I. Cure Monitoring »,
Smart Materials and Structures, vol. 16, (2007), pp. 1718-1726.
[MIJO 98] Mijoviæ J., Corso W.V., Nicolais L.,
Ambrosio G., « In-situ Real-Time Study of Crosslinking
Kinetics in Thermal and Microwave Fields », Polymers for Advanced
Technologies, vol. 9, (1998), pp. 231-243.
[LACI 00] Lack I., Krupa I., Stach M., Kuèma
A., Jurèiová J., Chodák I., « Thermal
lag
and its Practical Consequence in the Dynamic Mechanical
Analysis of Polymers », Polymer Testing, vol. 19, (2000), pp.
755-771.
[LEPA 05] Le Parlouër P., Legendre B.,
« Matériaux de références pour les
Techniques d'Analyses Thermiques et de calorimétrie et Méthodes
de Mesures Calorimétriques », Revue Française de
Métrologie, vol 10 N°10, (2005), pp. 19-26.
[CHER 97] Cherdoud-Chihani A., Mouzali M., Abadie
M.J.M., « Etude de la Réticulation DGEBA-Poly
(Styrène-Alt-Anhydride Maléique) par DSC Isotherme »,
European Polymer Journal, vol. 33, N°9, (1997), pp.
1415-1422.
[ZHOU 03] Zhou S., Hawley M.C., « A
Study of Microwave Reaction Rate Enhancement Effect in Adhesive Bonding of
Polymers and Composites », Composite Structures, vol. 61,
(2003), pp. 303-309.
[SOKO 93] Sokolov A.P., Kisliuk A., Quitmann D.,
« Evaluation of Density of Vibrational States of Glasses From
Low-Frequency Raman Spectra », The American Physical Society,
vol. 48, N°10, (1993), pp. 7692-7695.
[PELL 07] Pellegrino M., Mario A., Giuseppe R., Gennaro
S., « A Study by Raman, near-infrared and Dynamic-Mechanical
Spectroscopies on the Curing Behaviour, Molecular Structure and Viscoelastic
properties of Epoxy/Anhydride Network », Polymer, vol. 48,
Issue 13, (2007), pp. 3703-3716.
[FARQ 04] Farquharson S., Smith W., Rose J., Shaw M.,
« Correlation Between Molecular (Raman) and Macroscopic
(Rheology) Data for Process Monitoring of Thermoset Composites »,
Process Analytical Chemistry, pp. 45-53.
[COLI 02] Colin X., Marais C., Verdu J.,
« Kinetic Modelling and Simulation of Gravimetric
Curves: Application to the Oxidation of Bismaleimide and
Epoxy Resins », Polymer Degradation and Stability, vol.78,
(2002), pp. 545-553.
[BOUK 88] Boukenter A., Duval E., Rosenberg H.M.,
« Raman Scattering in Amorphous and Crystalline Materials : a
Study of Epoxy Resin and DGEBA », Journal Physics C : Solid State
Physics, vol. 21, (1988), pp. 541-547.
[CERV 06] Cervantes-Uc J.M., Cauich-Rodriguez J.V.,
Vazquez-Torres H., Licea-Claverýe A., «
TGA/FTIR Study on Thermal Degradation of Polymethacrylates Containing
Carboxylic Groups », Polymer Degradation and Stability, vol.
91, (2006), pp. 3312-3321.
[LAHL 05] Lahlali D., Naffakh M., Dumon M.,
« Cure Kinetics and Modeling of an Epoxy Resin Cross-Linked
in the Presence of Two Different Diamine Hardeners », Polymer
Engineering and Science, (2005), pp. 1582-1589.
[GEOR 96] George G.A., Cash
G.A., Rintoul L., « Cure Monitoring of
Aerospace Epoxy Resins and Prepregs by Fourier Transform Infrared Emission
Spectroscopy », Polymer International, vol. 41, (1996), pp.
169-182.
[HONG 93] Hong K.C., Vess T.M., Lyon R.E., Myrick
M.L., « Remote Cure Monitoring of Polymeric Resins by Laser
Raman Spectroscopy », 38th, International Society for the
Advancement of Material and Process Engineering (SAMPE) Symposium and
Exhibition Anaheim, CA, May 10-13, 1993.
[POWE 98] Powell G.R., Crosby P.A., Waters D. N.,
France C.M., Spooncer R.C., Fernando G.F., « In-situ Cure
Monitoring Using Optical Fibre Sensors a Comparative Study »,
Smart Mater. Structure, vol. 7, 1998, pp. 557-568.
[NACE 06] Naceri A., Vautrin A., «
Caractérisation du Comportement Mécanique d'un Composite
(Tissu de Verre/Résine Epoxyde) à Différentes
Périodes de Vieillissement Hygrothermiques », Afrique
SCIENCE, vol. 02, N°2, (2006), pp. 131-141.
|
|
